Im after a couple scaff steps,the ones with the pull out pins like on the haki temp roof frames,
The cheaper the better,
Cheers
John
I know,but I don't like the idea of advanced guardrail systems,unless there is one that u can slide along the lift in front of you,is there one?
Got any ali tube? Good way is to attach doubles above the guardrail you have in place then slide it out, keeping the tube within 2 doubles. You can then walk out and put in the permanent guardrail from behind the ali tube.
John, you can get a unit you slide in front of you but you still have the same problem with the hemps as you need to keep them high to support it. The sliding the tube on doubles just above normal hand rail height so you can fit a permanent 1 as you go is good for the long straight runs. G-scaff posted a couple of good videos on how he gets round the problem but for me the steps are the simplest solution but I have never used the b-safe as we also use some system.
I agree aom,so back to the question,
Where can I buy a scaff step with the pins you pull on to free the step from the handrail?
Cheers
John
I agree aom,so back to the question,
Where can I buy a scaff step with the pins you pull on to free the step from the handrail?
Cheers
John
a be safe guy came to our site few months ago a first bag with one wand and six sleeves is 800 quid and its awful and dangerous. we were lowering a 16 with the it and the tube slid out because they didnt grip well.
the pins like on the canpoie why if you going for the scaff step why not go the hole 9 yard and get some made up with a coupler on to really secure them on lol might be a laff and a joke that by maby just maby tg2013 might request that the slip value on the cmobi safe step is the same and any other fitting :notrust:
not sure but some 1 did say the cost around £90 quid try the usual george robets beaver genration how the bussiness going all good marra
I got two I don't want PM me.
Ragscaff