This post is for the lads that use CADS really, its expensive and times are hard so I've just sent this e-mail to them to try and get some resolution.
Dear CADS
I was using my program last week and I added a protection fan to the length of scaffold I had estimated. When I did the tg20 check it failed as design input was needed. In tg20 there are 3 protection fans allowed whereby you don't need to get a specific design. Is the tg 20 checker accurate and current with legislation at this time?
Are you any closer to being able to estimate Chimney stacks or temporary roofs using the program ? are you any closer to being able to estimate multiple birdcages/towers /loading towers etc of differing dimensions under the same item number e.g. Item 1 = 1 birdcage x 4m long x 4m wide x 4 m high 1 birdcage 6m long x 3m wide x 2m high and so on ?
I only ask as I have e-mailed already and have had no response, and have enclosed my last e-mail.
Could somebody please get back to me. I have posted this e-mail on the scaffolders forum with 2000 members so a speedy response/resolution wouldn't harm your cause.
That should chivvy them along, if you go to the protection fan thread you will get my point.I'm not slagging them off merely asking them for some straight answers and making my fellow forum friends aware of what I have found
Dear CADS
I was using my program last week and I added a protection fan to the length of scaffold I had estimated. When I did the tg20 check it failed as design input was needed. In tg20 there are 3 protection fans allowed whereby you don't need to get a specific design. Is the tg 20 checker accurate and current with legislation at this time?
Are you any closer to being able to estimate Chimney stacks or temporary roofs using the program ? are you any closer to being able to estimate multiple birdcages/towers /loading towers etc of differing dimensions under the same item number e.g. Item 1 = 1 birdcage x 4m long x 4m wide x 4 m high 1 birdcage 6m long x 3m wide x 2m high and so on ?
I only ask as I have e-mailed already and have had no response, and have enclosed my last e-mail.
Could somebody please get back to me. I have posted this e-mail on the scaffolders forum with 2000 members so a speedy response/resolution wouldn't harm your cause.
That should chivvy them along, if you go to the protection fan thread you will get my point.I'm not slagging them off merely asking them for some straight answers and making my fellow forum friends aware of what I have found