superscaff75
Well-known member
might be of interest to someone,
my mate is currently clearing a factory down south , thought they had been using scaffold tube as somekind of machinery framework , so thought he could sell loads but he thinks its only 44mm in diameter, so bit peeved when i told him to re check it as so far as im aware scaffold tube is 48mm diameter an wall 4mm .
there is hundreds of 2m 4m an 6m lengths so i said i would ask on here to A) confirm im right and you dont get 4mm variation in tube diameter in scaffold
B) does anyone have a use for 44mm galv tube for any kind of other uses than scaffold .
my mate is currently clearing a factory down south , thought they had been using scaffold tube as somekind of machinery framework , so thought he could sell loads but he thinks its only 44mm in diameter, so bit peeved when i told him to re check it as so far as im aware scaffold tube is 48mm diameter an wall 4mm .
there is hundreds of 2m 4m an 6m lengths so i said i would ask on here to A) confirm im right and you dont get 4mm variation in tube diameter in scaffold
B) does anyone have a use for 44mm galv tube for any kind of other uses than scaffold .