Truss outs

[stonedrose1]

As the title says, here's a couple of truss outs we've done recently. Couldn't be @rsed with the 450mm alloy beam run through under the puncheons for the second one as it was a pain in the @rse reaching down to fix them. We just shot the ledger through and picked it up with spurs from the next lift.

 

[frederik]

nice work stoned. Wouldnt an independant have been easier:wondering:

 

[stonedrose1]

The client needed it built that way. They need clearance on the ground for plant movement and ground works. The beams are right through the building with the same at the rear. It's also fully boarded inside as the first floor level is completely removed.

 

[Binthere]

Nice, would have liked to see the inside view though.

 

[lmk]

I'm not sure about the distance passed the raker on the second picture.

 

[Tony Mason]

Where can it go!

 

[lmk]

Down.

 

[SWIFTY]

Jason wouldn't have left it like that

 

[stonedrose1]

Nice, would have liked to see the inside view though.

Will take a picture and post tomorrow.

---------- Post added at 08:10 PM ---------- Previous post was at 08:08 PM ----------

I'm not sure about the distance passed the raker on the second picture.

It's an optical illusion.

 

[lmk]

I thought it must be.

 

[stonedrose1]

Here's some photos from inside the building as requested. The last photo is from the ground floor after the first floor has been taken away.