HSE Blitz

Mitchells Scaffolding

Well-known member
Joined
Jan 14, 2011
Messages
485
Reaction score
0
Location
Accrington Lancashire
Health & Safety Executive inspectors will be out in force making surprise swoops on construction sites across the country next week, for the start of a month-long clampdown.

Refurbishment, repair and maintenance activities will be particularly targeted, since more than 70% of the 42 construction fatalities in 2009/10 happened in that sector.
Issues that inspectors will be looking at most closely include height safety and asbestos risk management.
Last year HSE inspectors visited 2014 sites and 2414 contractors. They were forced to issue more than 350 prohibition notices to stop dangerous work, much of it relating to working from height.
Inspectors will be checking that:
• Jobs that involve working at height have been identified and properly planned to ensure that appropriate precautions are in place
• Equipment is correctly installed / assembled, inspected and maintained and used properly
• Sites are well organised, to avoid trips and falls
• Walkways and stairs are free from obstructions
• Work areas are clear of unnecessary materials and waste
HSE chief inspector of construction Philip White said: “This will be the fifth year that we have run the inspection initiative across Britain and we anticipate that that there will be examples of both good and bad practice - those where employers are taking all the measures they can to protect their workers and those where safety is way down the list of priorities.
“A lax attitude to health and safety in one of the more dangerous industries is not acceptable, especially when many of the incidents are completely avoidable by taking common-sense actions and precautions. As we’ve demonstrated in previous years, we will not hesitate to take action if we find poor practice that is putting the lives of workers at risk.
“This year, as part of ensuring risks from asbestos are properly managed, we will also be checking that, where appropriate, asbestos surveys have been carried out prior to any refurbishment work and that appropriate asbestos training has been given.. Many workers believe that, because asbestos has been banned as a building material, it’s no longer a threat to them. But that simply isn’t true. Any premises built or refurbished before 2000 could contain asbestos.”
 
Not another blitz.:suspicious: I shouldn't moan as we are starting to see results.
 
yep lets just see if the go for the cowboys in our trade
ah but they dont leave any kinda sinage no tracking them then
and no doubt they will live to undercut another day
 
In all honesty we have very little to moan about in that regard since a new broom moved into town and is making it his business to educate a wide range of scaffold users in correct methods. His next step is site closures and the result is we can hardly keep up at the moment.
 
Correct on this:

1, if you think you will be cut down make yourself busy and known. More you do less chance of being laid off. (HSE prospective i guess)

2, The focus on Work at Height is:

Bespoke Method Statements and Risk Assessments
Rescue Plans
Pull Testing Certification
Handovers
Competence including training to erect system scaffolds
Inspections, frequency and thoroughness.

Its an enforcement campaign so expect a few notices.

IF
 
Last edited:
Correct on this:

1, if you think you will be cut down make yourself busy and known. More you do less chance of being laid off.

2, The focus on Work at Height is:

Bespoke Method Statements and Risk Assessments
Rescue Plans
Pull Testing Certification
Handovers
Competence including training to erect system scaffolds
Inspections, frequency and thoroughness.

Its an enforcement campaign so expect a few notices.

IF

Am I right in saying pull test certification is a very simple document to produce and can be done easily by almost any one with a calibrated tester?

There is no legal requirement to produce a hand-over certificate?

System training is currently included in the apprentice scheme?

Inspection is down to the user not the erector?
 
Am I right in saying pull test certification is a very simple document to produce and can be done easily by almost any one with a calibrated tester?

There is no legal requirement to produce a hand-over certificate?

System training is currently included in the apprentice scheme?

Inspection is down to the user not the erector?

AOM,

1 point at a time.

If you use the NASC handover note there is a section for ties and testing of them, if not you have to demonstrate type of tie and test data. If you have a tester from Hydrajaws, they normally show you how to use it. If not Hilti.

If we say there is no legalalities to a hanover certificate? What method do you use to demonstrate the scaffold is fit for your client to use and whats his acceptance of it. A new handover cert is being produced called handover cert/first inspection in the near future.

Inspection weekly is down to the user unless he delegates that duty to someone else, you or a third party, however he cannot discharge his duties.

I cannot see anything but familiarisation for apprentices on system, unless you have some formal certificates showing what they have been taught. Are they on apprentices courses that cater solely for system.

IF
 
AOM,

1 point at a time.

If you use the NASC handover note there is a section for ties and testing of them, if not you have to demonstrate type of tie and test data. If you have a tester from Hydrajaws, they normally show you how to use it. If not Hilti.

If we say there is no legalalities to a hanover certificate? What method do you use to demonstrate the scaffold is fit for your client to use and whats his acceptance of it. A new handover cert is being produced called handover cert/first inspection in the near future.

Inspection weekly is down to the user unless he delegates that duty to someone else, you or a third party, however he cannot discharge his duties.

I cannot see anything but familiarisation for apprentices on system, unless you have some formal certificates showing what they have been taught. Are they on apprentices courses that cater solely for system.

IF

Ian,

Yes we do use the hand-over certs but I was just wondering how others would deal with it who were not members. Our tester is from Hilti who showed us how to use it in about 5 minutes flat as it's hardly rocket science, but sometimes I wonder when you see so many so called specialists offering testing as a service. So am I right in saying that no other documentation is required for testing if you are using the hand overs correctly?

As for the legalities, again I was just wondering and looking for conformation out of interest as I'm sure I've read that many times.

The system training might well just be familiarisation but is that not what all system training is "Product Familiarisation"? That should be more than sufficient training for basic structures as a minimum surely.
 
Quite good Ian, but if the scaffs are doing their own I was trying to find out if the information on the hand-over would suffice without producing more and more paper work. That's ok if someone is paying for a separate service.
 
Well from my point of view is the reduction by 35% by the goverment to the HSE funding should have been increased by 35% as we dont have enough inspectors out there.. If you have nothing to hide why worry!!
 
up in my area, the north east, ( im sure some of you will have heard of it before, its up just past leeds, where all the good roads turn to from motorways to just highways. ) I cant remember the last time the hse did a spot check, or a blitz, or anything at all for that matter, except when someone has phoned them .

in the past 15 yr at least I have had dealings with hse possibly 9 times at most, mostly i would say about 6 of those times must of been 10 yr ago. We barely ever hear their name mentioned , they rarely in the papers doing anything, unless something has already happened and they investigating it,

They are supposed to be doing inspections nxt wk of factories in aycliffe industrial park according to the local rag, probablies because there has been 2 major incidents in past 2 years .

I cant even remember being on site at anytime lately and a site manager mentioning they had or were expecting the hse to visit or they had visited other company sites.

anyone else up here think different or what
 
up in my area, the north east, ( im sure some of you will have heard of it before, its up just past leeds, where all the good roads turn to from motorways to just highways. ) I cant remember the last time the hse did a spot check, or a blitz, or anything at all for that matter, except when someone has phoned them .

in the past 15 yr at least I have had dealings with hse possibly 9 times at most, mostly i would say about 6 of those times must of been 10 yr ago. We barely ever hear their name mentioned , they rarely in the papers doing anything, unless something has already happened and they investigating it,

They are supposed to be doing inspections nxt wk of factories in aycliffe industrial park according to the local rag, probablies because there has been 2 major incidents in past 2 years .

I cant even remember being on site at anytime lately and a site manager mentioning they had or were expecting the hse to visit or they had visited other company sites.

anyone else up here think different or what

.
The last 3 inspectors they sent up your way are still missing :D
 
up in my area, the north east, ( im sure some of you will have heard of it before, its up just past leeds, where all the good roads turn to from motorways to just highways. ) I cant remember the last time the hse did a spot check, or a blitz, or anything at all for that matter, except when someone has phoned them .

in the past 15 yr at least I have had dealings with hse possibly 9 times at most, mostly i would say about 6 of those times must of been 10 yr ago. We barely ever hear their name mentioned , they rarely in the papers doing anything, unless something has already happened and they investigating it,

They are supposed to be doing inspections nxt wk of factories in aycliffe industrial park according to the local rag, probablies because there has been 2 major incidents in past 2 years .

I cant even remember being on site at anytime lately and a site manager mentioning they had or were expecting the hse to visit or they had visited other company sites.

anyone else up here think different or what

Super, its because all of the jobs we put up, are as near as dam it, so why waste government resources:laugh::laugh::laugh:
Oh! and the last three went missing PMSL
 
Top Bottom